c64c_installation
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
c64c_installation [2020/09/09 12:02] – silverdr | c64c_installation [2020/09/09 12:05] – [Installing BeamRacer board] silverdr | ||
---|---|---|---|
Line 9: | Line 9: | ||
===== Installing BeamRacer board ===== | ===== Installing BeamRacer board ===== | ||
- | - Locate the orientation notches on both the VIC-II chip and the original socket on the mainboard((In case the orientation notch is not present on the original socket, check the white outline drawing on the board itself - it should be partially visible below the socket)). In all known cases this should be either on the left-hand side or at the far side, when the mainboard is placed in it normal, working orientation with connectors away from you and to the right | + | - Locate the orientation notches on both the VIC-II chip and the original socket on the mainboard((In case the orientation notch is not present on the original socket, check the white outline drawing on the board itself - it should be partially visible below the socket)). In every Commodore 64C this should be at the far side, when the mainboard is placed in its normal, working orientation with connectors away from you and to the right |
- Align orientation notches on the VIC-II/ | - Align orientation notches on the VIC-II/ | ||
- Double-check that all pins on the BeamRacer board are completely straight. | - Double-check that all pins on the BeamRacer board are completely straight. |
c64c_installation.txt · Last modified: 2020/09/09 21:48 by laubzega