User Tools

Site Tools


making_full_use_of_memory_ports

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
making_full_use_of_memory_ports [2020/10/13 19:56] – [Copying data in local RAM] laubzegamaking_full_use_of_memory_ports [2020/10/18 21:56] (current) – [Inside a port] laubzega
Line 7: Line 7:
 The ports are intended to be efficient and flexible means of accessing VASYL's local memory. As such, they have been equipped with extra hardware to accelerate some of the most frequent operations. We have already seen memory pointer post-increment/decrement in action, but there is more. The ports are intended to be efficient and flexible means of accessing VASYL's local memory. As such, they have been equipped with extra hardware to accelerate some of the most frequent operations. We have already seen memory pointer post-increment/decrement in action, but there is more.
  
-Each of the two ports has its own DMA channel to the local memory, and is able to make one access - either read or write - per system clock cycle. This gives a theoretical transfer rate of ~1 MB/s per port. The 6502 is too slow to saturate even one such channel, because in the best case it can write to IO region once every four cycles (e.g. using a sequence of **STA** instructions). However, since display lists are also able to write to port registers, they can use ports to manipulate local memory at great speed. And since display lists are themselves located in that memory, it opens the possibility for display lists to manipulate both themselves and the data they use.+Each of the two ports has its own DMA channel to the local memory, and is able to make one access - either read or write - per system clock cycle. This gives a theoretical transfer rate of ~1 MB/s per port. The 6510 is too slow to saturate even one such channel, because in the best case it can write to IO region once every four cycles (e.g. using a sequence of **STA** instructions). However, since display lists are also able to write to port registers, they can use ports to manipulate local memory at great speed. And since display lists are themselves located in that memory, it opens the possibility for display lists to manipulate both themselves and the data they use.
  
 Before we get to that, let's have a closer look at registers ''REP0'' and ''REP1''. Before we get to that, let's have a closer look at registers ''REP0'' and ''REP1''.
Line 217: Line 217:
 </code> </code>
  
-Will read a value from PORT1, and store it in VIC border color register. Here is a more complete example using PORT0.+will read a value from PORT1, and store it in VIC border color register. Here is a more complete example using PORT0.
  
 <code vasyl> <code vasyl>
making_full_use_of_memory_ports.1602644211.txt.gz · Last modified: 2020/10/13 19:56 by laubzega