isa
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
isa [2021/03/15 15:32] – [MOV] silverdr | isa [2022/07/26 12:53] (current) – [IRQ] silverdr | ||
---|---|---|---|
Line 48: | Line 48: | ||
^ VBASIC | ^ VBASIC | ||
| **VIRQ ** | 1 | 0 | 1 | 0 | 0 |0 | 1 | 0 | | | | | | **VIRQ ** | 1 | 0 | 1 | 0 | 0 |0 | 1 | 0 | | | | | ||
- | |Raise 6510 IRQ. \\ \\ If bit 4 of VIC-II IRQMASK register ($D01A) is set to “1”, this instruction will cause VASYL to pull down the 6510 IRQ line and set bit 4 and 7 in VICIRQ register ($D019). This will in turn cause the 6510 to start executing | + | |Raise 6510 IRQ. \\ \\ If bit 4 of VIC-II IRQMASK register ($D01A) is set to “1”, this instruction will cause VASYL to pull down the 6510 IRQ line and set bit 4 and 7 in VICIRQ register ($D019). This will in turn cause the 6510 to start servicing |
==== MASKH==== | ==== MASKH==== | ||
Line 66: | Line 66: | ||
^ VBASIC | ^ VBASIC | ||
| **VMOV** | 1 | 1 | R5 | R4 | R3 | R3 | R1 | R0 | X7 | X6 | X5 | X4 | X3 | X2 | X1 | X0 | R [0,63], X [0, 255] | | | **VMOV** | 1 | 1 | R5 | R4 | R3 | R3 | R1 | R0 | X7 | X6 | X5 | X4 | X3 | X2 | X1 | X0 | R [0,63], X [0, 255] | | ||
- | |Move value **X** to bus-accessible register **R**. \\ \\ Value **X** is transferred to a register indicated by **R**. **R** from 0 to $2E correspond to VIC-II registers $D000 to $D02E. Values starting with $31 correspond to VASYL registers $D031-$D03E. **MOV**s to VASYL registers happen internally in the chip and are guaranteed to complete in one cycle. **MOV** to any VIC-II register uses the local bus that gets isolated from the main system bus for the duration of the move. **MOVs** to VIC-II registers are impossible while VIC is occupied | + | |Move value **X** to bus-accessible register **R**. \\ \\ Value **X** is transferred to a register indicated by **R**. **R** from 0 to $2E correspond to VIC-II registers $D000 to $D02E. Values starting with $31 correspond to VASYL registers $D031-$D03E. **MOV**s to VASYL registers happen internally in the chip and are guaranteed to complete in one cycle. **MOV** to any VIC-II register uses the local bus that gets isolated from the main system bus for the duration of the move. **MOVs** to VIC-II registers are not possible at the time VIC is occupied |
==== MOVI==== | ==== MOVI==== |
isa.1615847521.txt.gz · Last modified: 2021/03/15 15:32 by silverdr