Differences

This shows you the differences between two versions of the page.

--- c64c_installation [2020/09/09 12:06] – silverdr
+++ c64c_installation [2020/09/09 21:48] (current) – [Commodore 64C specific installation procedure] laubzega
@@ Line 5: / Line 5: @@
 {{ :installation_c64c_c36_capacitor.jpg?direct&400 |C36 capacitor}}
-When testing this approach we found that in some boards the capacitor C36 is loaded and soldered in a way, which prevents bending it away without damaging. <fc #cd5c5c>Please DO NOT FORCE-BEND any of the components on your mainboard!</fc> If it can't be easily bent away, it needs to be re-soldered with enough play to allow it to be put horizontally over the mainboard. Seek trained technician help if you don't feel comfortable doing it yourself! We haven't yet seen a board where other components would need to be re-soldered to allow positioning them flat. Still – [[wp>YMMV]]! Having that in mind, please make sure that none of the "C36", "C37", "C77" nor "Q3" components stand in the way before proceeding. Once you are 100% sure that no components stand in the way:
+When testing this approach we found that in some boards the capacitor C36 is loaded and soldered in a way, which prevents bending it away without damaging. <fc #cd5c5c>Please DO NOT FORCE-BEND any of the components on your mainboard!</fc> If it can't be easily bent away, it needs to be re-soldered with enough slack to allow it to be put horizontally over the mainboard. Seek trained technician's help if you don't feel comfortable doing it yourself! We haven't yet seen a board where other components would need to be re-soldered to allow positioning them flat. Still – [[wp>YMMV]]! Having that in mind, please make sure that none of the "C36", "C37", "C77" nor "Q3" components stand in the way before proceeding. Once you are 100% sure that no components stand in the way:
 ===== Installing BeamRacer board =====