Differences

This shows you the differences between two versions of the page.

--- beamracer_installation [2020/09/30 09:45] – [Placing VIC-II on the BeamRacer board] silverdr
+++ beamracer_installation [2020/10/16 04:05] – [Preparing the computer] silverdr
@@ Line 2: / Line 2: @@
 While BeamRacer installation is a relatively easy task, requiring neither specialised skills nor equipment, a few preparation steps need to be taken in order to properly conduct the process. The assumption is that the person performing the installation does not have access to a specialised electronic workplace but is still comfortable with using common household tools.
-Please read this document in full before proceeding with the installation - it's always better to know what lies ahead.
+Please read this document in its entirety before proceeding with the installation - it's always better to know what lies ahead.
 <fc #cd5c5c>NOTE: When installing, we strongly suggest following the order presented in this document</fc>:
@@ Line 33: / Line 33: @@
   - Final, pre-installation check that the machine still powers up without problems
-If you are not familiar with the innards of your Commodore 64, we shall try to provide you more thorough instructions on the [[computer_opening|Computer Preparation]] page
+If you are not familiar with the innards of your Commodore 64, we shall try to provide you more thorough instructions on the [[computer_preparation|Computer Preparation]] page
 ===== Removing VIC-II from the mainboard =====