beamracer_installation
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
beamracer_installation [2020/09/21 13:44] – [Preparation] silverdr | beamracer_installation [2022/07/18 11:21] – [Obtaining access] silverdr | ||
---|---|---|---|
Line 2: | Line 2: | ||
While BeamRacer installation is a relatively easy task, requiring neither specialised skills nor equipment, a few preparation steps need to be taken in order to properly conduct the process. The assumption is that the person performing the installation does not have access to a specialised electronic workplace but is still comfortable with using common household tools. | While BeamRacer installation is a relatively easy task, requiring neither specialised skills nor equipment, a few preparation steps need to be taken in order to properly conduct the process. The assumption is that the person performing the installation does not have access to a specialised electronic workplace but is still comfortable with using common household tools. | ||
- | Please read this document in full before proceeding with the installation - it's always better to know what lies ahead. | + | Please read this document in its entirety |
<fc # | <fc # | ||
Line 33: | Line 33: | ||
- Final, pre-installation check that the machine still powers up without problems | - Final, pre-installation check that the machine still powers up without problems | ||
- | If you are not familiar with the innards of your Commodore 64, we shall try to provide you more thorough instructions on the [[computer_opening|Computer Preparation]] page | + | If you are not familiar with the innards of your Commodore 64, we shall try to provide you more thorough instructions on the [[computer_preparation|Computer Preparation]] page |
===== Removing VIC-II from the mainboard ===== | ===== Removing VIC-II from the mainboard ===== | ||
Line 41: | Line 41: | ||
==== Obtaining access ==== | ==== Obtaining access ==== | ||
- | On all older, " | + | On all older, " |
On the newer, [[narrow_boards|" | On the newer, [[narrow_boards|" | ||
Line 60: | Line 60: | ||
- Check and align orientation notches on both the BeamRacer top socket and the riser socket | - Check and align orientation notches on both the BeamRacer top socket and the riser socket | ||
- Make sure that all the downward facing BeamRacer board pins fit well inside the riser socket openings | - Make sure that all the downward facing BeamRacer board pins fit well inside the riser socket openings | ||
- | - Align the socket pins to form a straight line with the BeamRacer board pins. There is a bit of play so it is important keep the two aligned against each other | + | - {{:: |
- | - Double check that all pins fit with no bend-ins or bend-outs | + | - {{:: |
- | - Press gently but firmly the two together using a stiff straight object. It is OK to do it one side at a time. Be prepared to apply considerable amount of force (it has to sit very firmly) but re-check everything if you feel like an excessive force is already at play! | + | - {{:: |
- | - Make sure that there are no gaps left either of both sides | + | - {{:: |
- {{:: | - {{:: | ||
beamracer_installation.txt · Last modified: 2022/07/18 11:24 by silverdr